Alchitry V2 – Information – SparkFun Electronics

Our favourite FPGAs simply acquired a large improve!

Whats up everybody and welcome again to a different Friday Product Publish right here at SparkFun Electronics! This week we’re including the model new Alchitry V2 merchandise to the SparkFun catalog! These are a few of our favourite FPGA boards and seeing growth boards just like the AU and Cu recieve main face lifts and powerful ecosystem to assist them is a big deal with! Let’s take a more in-depth look!

The Alchitry Au V2 is the “gold” commonplace for FPGA growth boards and it is presumably one of many strongest boards of its sort available on the market. FPGAs, or Area-Programmable Gate Arrays, are a complicated growth board sort for engineers and hobbyists alike to expertise the following step in programming with electronics. The Au continues the development of extra inexpensive and more and more highly effective FPGA boards arriving annually. This board is a unbelievable start line into the world of FPGAs and the guts of your subsequent challenge.

---

In case you are not needing a number of energy to start out your FPGA journey, or are searching for a extra economical choice, the Alchitry Cu V2 FPGA Improvement Board is perhaps the proper choice for you! The Alchitry Cu is a “lighter” FPGA model than the Alchitry Au however nonetheless provides one thing fully distinctive. FPGAs, or Area-Programmable Gate Arrays, are a complicated growth board sort for engineers and hobbyists alike to expertise the following step in programming with electronics. The Cu really exemplifies the development of extra inexpensive and more and more highly effective FPGA boards arriving annually. This board is a unbelievable start line into the world of FPGAs and the guts of your subsequent challenge.

---

The Alchitry Br V2 in your go-to prototyping Aspect for Alchitry FPGA. This board breaks out all of the sign pins on the Alchitry headers to 0.1in. simple to solder holes.

As a result of the stack top on the brand new boards is just 4mm, the Br V2 huge model is beneficial for many makes use of so that you need not fear about how far solder joints hold under the board. The holes above the USB port have little or no clearance beneath.

---

The Alchitry Io Aspect Board V2 is the proper solution to get your toes moist with digital design. The Io options 4 7-segment LEDs, 5 momentary push buttons, 24 fundamental LEDs, and 24 DIP switches that each one lend themselves to unbelievable newbie tutorials that may stroll you thru all of the fundamentals of FPGAs.

---

The Alchitry Hd V2 board provides two micro HDMI ports to your Alchitry Au! Every port is configurable as a supply or sink through solder jumpers. The board haves a 5V enhance converter and 5V<->3.3V IO stage shifters for the I²C interfaces and sizzling plug indicators on the HDMI ports.

---

Must get a number of knowledge in or out of your design? Look no additional than the Alchitry Ft V2! The Ft options the FT600Q which is able to as much as 200MB/s (that is bytes not bits).

In the meantime, the Alchitry Ft+ V2 options the FT601Q which doubles that to 400MB/s at the price of 18 extra IO pins.

---

Use the brand new Alchitry V2 boards together with your outdated V1 add-on boards with this V2 -> V1 adapter. It has the brand new model connectors on the underside and the outdated model on the highest.

---

Give your FPGA a bit of respiratory room with the Alchitry Sp. This board provides 5.6mm of additional house between stacked boards making room for an included 25m x 25mm x 5mm heatsink.

---

Hold your board further cool with the Alchitry Fn! This board includes a 3cm x 3cm x 1cm blower model fan that forces recent cool air over the FPGA. It additionally comes with an outsized 25m x 25mm x 5mm heatsink to connect to the FPGA.

---

Shield your Alchitry board by including these fashionable standoffs! The bolts protrude about 2mm under the board which is simply additional than the bottom half on the underside of the Au or Cu.

---

This can be a set of 4 2×14 and two 2×6 feminine headers with 0.1in.-spaced pins for the Alchitry Br Vast V2 Board. These line up precisely with all of the damaged out holes within the Br prototyping space to make it simple to leap wires to a breadboard or different short-term connections.

---

That is it for this week. As at all times, we won’t wait to see what you make! Shoot us a tweet @sparkfun, or tell us on Instagram, Fb or LinkedIn. Please be protected on the market and be form to at least one one other! Glad hacking!